|
Reverse Osmosis Cooler
Sanitary
Quick Change Cartridges
No Bottles Required
Connects Directly to Plumbing
This
Oasis Reverse Osmosis (RO) Cooler
produce up to 50 gallons
per day of delicious water chilled or tepid for drinking or piping hot
for soups and teas. This model features an easily removable 6-plus gallon
reservoir. All components are manufactured to exacting specifications and
meet FDA requirements. Advanced RO design features "snap in" replaceable cartridges
for convenient servicing. The Thin Film Composite (TFC) membrane will produce
up till 50 gallons per day. Models PDQT1AQK and PDQT1AQHK have
a LED water quality monitor which validates membrane performance by simply
touching the conveniently located Smartap button. Smartap is a dual probe
percentage water quality monitor which compares the tap vs. product water
quality. The model PDQT1AQK will provide Cook (Tepid) & Cold water.
Model PDQT1AQHK will provide Hot, Cook (tepid) & Cold water.
Cabinet:
With OASIS® patented Quick Change Disposable Cartridge
Filtration Systems. Cartridge replacement
are a snap - literally. The cartridges snap in, in a method similar to a
florescent bulb. No mess, no leaks, no O-ring.
|
|
| |
Sanitary Quick Change Cartridges
|
Drip Receptor: Large
and easy to clean with molded splash ridges that hold cup in place while filling.
Faucets: Durable polypropylene. Self-closing type. Easy to operate. Standard
child resistant safety hot faucet.
Water Storage Reservoir: Removable large capacity injection molded reservoir
with airtight snap-on lid assembly that allows easy access for cleaning and
sanitization. Provides 1.7 gallons of chilled water storage. Probe and sleeve
cooling technology makes removal easy by reducing the time it takes to drain
the reservoir when removing.
Cold Water Capacity:
Provides up to 1.3 gallons of 50 degree F water at 70 degrees F ambient temperature
environment.
Cold Water Thermostat:
Temperature is controlled by adjustable thermostat located behind the front
access panel.
Flow Controls: Low voltage circuit operates feed water solenoid through
primary float which senses water level in reservoir. If primary float fails,
the unit will continue to operate on the secondary safety float.
Refrigeration Unit: Convection-cooled condenser. Hermetically sealed
compressor with automatic overload protector. Environmentally friendly R-134a
refrigerant controlled by accurately calibrated capillary tube.
Hot Tank: (Model PDQT1AQHK) The removable, stainless steel hot
tank puts the heating element where it works best - inside the hot tank. The
result is more efficient heating and a hot tank that's easier to service. The
adjustable thermostat allows customized setting for individual needs.
Hot Water Capacity: 45 six-ounce cups of piping hot water per hour.
.
Hot Water Thermostat: Water temperature is controlled to nearly 180 degrees
F by automatic thermostat. On-off switch is located on the front of the unit.
Electrical: 110 volts, 60 Hz: Compressor hp: 1/20.
Full load amps: Hot, Cook & Cold Models 5.5 amps; Cook and Cold Models
1.8 amps.
Plumbing Requirement: One (1) 1/4 " compression water supply. One
(1) 1/4" compression water waste connection.
|
Do
not connect to a water source that is microbiologically unsafe or is of
unknown quality. Source water must be potable.
|
Shipped
Freight Free within the mainland United
States
All
units are genuine, factory new and have never been used.
Export
Models:
PST1AQHKY and PST1AQKY are also available, operable on 220-240 volts, 50-60
Hertz, having 1/20 hp compressor and requiring no transformers. Please email,
with your requirements and we will send you a quotation. We will not arrange
for shipping outside the United States, but we will ship to your frieght forwarder.
| 
Filtration
