|
Flow-Max® Cartridges by Aquadepot®
Flow-Max® Pleated Cartridges
High flow, long life, greater sediment removal and reduced filtration costs.
Flow-Max® filter cartridges outperform wound,
spun, melt blown, resin bonded and other ”depth” type filter elements
because our cartridges are pleated to provide increased surface area and
longer life. Lower pressure drop is another significant advantage, using
Flow-Max® pleated cartridges, which allows for increased flow rates
and the use of smaller filter housings to reduce capital equipment costs.
Further savings are provided because our 100% synthetic filter media is
cleanable, five micron and up, to lower cartridge replacement costs.
|
|
Flow-Max® filter cartridges outperform other
pleated elements because our high performance filter media is systematically
produced using 100% synthetic fibers, with no binders or additives to leave
a residue, foam or contaminate. Our filter media is dramatically thicker
than other products. For this reason, Flow-Max® cartridges provide “depth”
filtration for greater sediment removal, along with more surface area with
our pleated design.
|
Temperature Range: 40°F - 140°F
Filter Media: Synthetic (100% Cellulose Free)
End Caps: Plastisol (PVC) |
Lower pressure drop for higher flow rates Flow-Max® cartridges are pleated,
so initial pressure drop is significantly less compared to depth cartridges,
such as wound, spun, melt blown and resin bonded. As a result, higher flow rates
are possible, reducing filter housing size requirements to lower capital equipment
costs.
Flow rates
Maximum flow rate guidelines for clean Flow-Max® cartridges are shown below:
Standard Sizes (2-3/4" diameter)
TAKE NOTE OF THE LENGTH
|
Model
|
Micron Rating
|
Cartridge Dimensions
OD x Length
|
Case
Quantity
|
Maximum Flow Rate, Per New Cartridge
in Gallons per Minute
|
| FM-1-195 |
1
|
2¾" x 19½"
|
24
|
8 GPM
|
| FM-5-195 |
5
|
2¾" x 19½"
|
24
|
14 GPM
|
| FM-20-195 |
20
|
2¾" x 19½"
|
24
|
16 GPM
|
| FM-50-195 |
50
|
2¾" x 19½"
|
24
|
20 GPM
|
|
Model
|
Micron Rating
|
Cartridge Dimensions
OD x Length
|
Case
Quantity
|
Maximum Flow Rate, Per New Cartridge
in Gallons per Minute
|
| FM-1-20 |
1
|
2¾" x 20"
|
24
|
8 GPM
|
| FM-5-20 |
5
|
2¾" x 20"
|
24
|
14 GPM
|
| FM-20-20 |
20
|
2¾" x 20"
|
24
|
16 GPM
|
| FM-50-20 |
50
|
2¾" x 20"
|
24
|
20 GPM
|
|
|
|
Washable & Reusable
Flow-Max® cartridges are washable and reusable, five micron and
up to reduce filtration costs. For best results, direct spray into
pleats to dislodge sediment. Or, let dry and brush off filter cake
from surface of the media. |
|
|
Sold only in full case quantities. Price is for a
full case of 24 pieces.
Model FM-50-195, 50 Micron, 2-3/4" OD x 19½"
Long
|
Filtration
